The new type of impact crusher produced by Huashengming Heavy Industry can handle the side length of 100 ~ 500 mm below the material, its high compressive strength up to 350 mpa, has the advantages of large crushing ratio, crushed material is cubic particles, etc., the impact crusher equipment is suitable for crushing hard materials, such as limestone crushing cement factory, with large production capacity, The advantage of small discharge particle size. Impact crusher is generally used as a secondary crushing equipment, and can also change the rotor and crushing chamber according to the requirements of users. As a primary crushing equipment, it is widely used in highway, reservoir, railway, airport and other fields that require relatively high stone shape. 

Working principle:

Impact crusher equipment is a kind of crushing machinery which uses impact energy to break materials.

When the machine is working, driven by the motor, the rotor rotates at a high speed. When the material enters the plate hammer acting zone, it is crushed by the plate hammer on the rotor, then it is thrown to the counter device and broken again, and then it springs back from the counter lining to the plate hammer acting zone and broken again.

This process is repeated, and the material enters the one, two and three counter cavities from large to small.

Until the material is broken to the required size, discharged from the discharge port. Adjusting the clearance between the counter frame and the rotor can achieve the purpose of changing the particle size and shape of the material. Stone from the upper part of the machine directly into the high-speed rotation of the turntable;

Under the action of high-speed centrifugal force, it produces high-speed collision and high density crushing with the other part of the flying stones that are shunted around the turntable in umbrella form.

After striking each other, the stones will form eddy motion between the turntable and the housing, causing many blows, friction and crushing to each other, which are discharged from the lower straight through.

Form closed circuit multiple cycles, by screening equipment control to achieve the required granularity.

Product parameter